How to Assemble your Crown
You have created flowers, basket, handles, etc, so now its time to assemble your crafty quilt. Lets get started.
How to Assemble:
You are assembling the crown of your quilt at this point. If you havent started your craft project to create the Spring Basket, leave this work to those who are at the crown. To collect your crown use your threads that counterpart and begin blind stitching across your fabric, sewing your flower onto the fabric, as well as two of your foliages. Sew to the center bloom as well, and stitch en route for the wrong side (left) of your created 3-block baskets. Stitch to the right and finish your final blocks. (3)
At the lower region of your basket, affix your blooms so that they join with the handles. Now, snip your lighter shades of filaments/strands, and shades of pink (6) silkworm fibers (Floss), cutting lengthwise so that it is corresponding with the measurements lengthwise of your arm. You want to create strands (3) on each section of fiber. Divide and use needle and thread (large eye needle) along with the length of your three filaments and stitch so that it forms a circle. You are making your granny knots, to create the French version that will stretch about your center flower and the dark flowers you have created.
Again, trim your darker shades of six-pink, filaments, and silkworm fibers, cutting it along the length so that it is equivalent to your arm span. Generate 3-filaments on each section of your fibers. Partition and make use of hand used needle and filament, stitching the length the three threads. Stitch until it shapes a loop. Starting at the shades of green, snip the narrow sash pieces and cut the pieces into 1 x 10 inches. You are making your D-block. Snip another three narrow pieces until you achieve measured parts at 1 x 28 inches. You will use these parts to make your E-block. Alternatively, snip your D-block, cutting three from your pattern and form 4-D narrow pieces. You want your ducks in a row. (I.e. Blocks) Use only 2-blocks to form a row at this time and begin stitching the blocks forming 3-E narrow pieces. This is the middle region of your coverlet, or quilt. Use the variety of floral prints and snip the inside borders of your narrow pieces. Snip at least two narrow parts at 1 x 23 inches. Use the parts to create the F-borders at the side. Now, snip another one x 29 -inch narrow pieces to create G-borders at the lower and upper region of your quilt.
Continuing, sew the border sides to the center of your coverlet. Continue to sew the drop and greater borders. Begin at the floral region, i.e. the print textile press with your iron. DO NOT IRON rather gently press, Lift; relocate, etc.
Now, you are ready to craft your binds for your quilt. Use your floral materials and sew the greater, drop, and sides of your borders. Now fill it in with the center of your quilt patterns.
You have done a great job, so now it is time to finish your work. Use your backing cloth, batting, and crown of your coverlet and coat. To prepare your coverlet, pin baste to layer, followed by hand sewing or machine sewing your quilt. Use your machine at the crown to sew the untreated edges. If you have extra batting, cut it. Do the same for backing cloth. Now bind and snip your satin, yellow ribbon to form your bow. Cut six even parts. Finish by tying your ribbon, forming a bow and stitch by hand your bows, one for each side of your handles on your basket.